BTM Shingle Roll Round
Membrane Shingle Roll with BTM Shingle pattern is a waterproofing membrane with polyester mat carrier, with APP additive, having Shingle look, colorful granulated and designed for inclined roofs, applied by means of torch.
Membrane Shingle Roll with BTM Shingle pattern is a waterproofing membrane with polyester mat carrier, with APP additive, having Shingle look, colorful granulated and designed for inclined roofs, applied by means of torch.
The patters of BTM Shingle Roll Round are created in modern machines by using colorful natural stones, not by means of dyeing. Problems such as color bleeding or fading are not seen on BTM Shingle Roll Round. Problems such as color bleeding or fading are not seen on BTM Shingle Roll Round.
Inclined roofs
Penthouses
Pergolas
Garden Sheds
Bowers
The surface on which BTM Shingle Roll Round application will be applied should be free from dust, dirt, rust, and oil. Before the application, BTR 100-200 Bitümer serial lining should be applied and it should be continued with BTM Shingle Roll Round application after the lining completely dries.
It is advised to be used on %20 and more inclined roofs if it is used as one layer. It is applied by means of torch. It is required to pay attention to pattern continuity and alignment.
BTM Shingle Roll Round has 1 m width and 8 m length and is offered to the market in roll form.
BTM Shingle Roll Round rolls should be stored in closed areas and in an upright manner. If the rolls are required to be stored in an open place for a long time, they should be covered in order to be protected from the sun. If the rolls are piled without pallet, they are not placed one on the top of the other. While piling with pallet, maximum two lines can be placed one on the top of the other.